Nikon Z7' firmware update V 1.03 & Z6' FU V1.01

Everything you want or need to know about the upcoming Nikon mirrorless cameras.
Alles wat je wil of moet weten over Nikon Mirrorless

Moderator: Stany Buyle

Nikon Z7' firmware update V 1.03 & Z6' FU V1.01

Postby admin » Wed 13 Feb 2019 09:49

From the Nikon website:

Z7 firmware update:
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

• This service supplies software that can be used to update the Z 7 camera “C” firmware to version 1.03. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
• This update includes all changes made in previous updates.
• Read the information below before proceeding.

Changes from “C” Firmware Version 1.02 to 1.03
• When On is selected for HDMI > Advanced > N-Log setting in the SETUP MENU, Maximum sensitivity now takes effect during movie recording if:
- the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or
- the camera is in mode M (manual) and On is selected for ISO sensitivity settings > Auto ISO control (mode M) in the MOVIE SHOOTING MENU.
• Fixed an issue that resulted in third-party software showing an incorrect value for the Exif 35 mm format equivalent focal length field for photographs taken with a non-CPU lens connected via an FTZ mount adapter with the focal length specified using the Non-CPU lens data item in the SETUP MENU.
• Fixed an issue that resulted in photographs taken using radio-controlled Advanced Wireless Lighting being overexposed if a face was detected with Auto-area AF selected for AF-area mode.
Note: Please be sure to also read ‘Changes from Previous Versions’, which has been updated with new additions to ‘Changes from “C” Firmware Version 1.01 to 1.02’.


Z6 firmware update:
This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

• This service supplies software that can be used to update the Z 6 camera “C” firmware to version 1.01. Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
• Read the information below before proceeding.

Changes from “C” Firmware Version 1.00 to 1.01
• When On is selected for HDMI > Advanced > N-Log setting in the SETUP MENU, Maximum sensitivity now takes effect during movie recording if:
- the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or
- the camera is in mode M (manual) and On is selected for ISO sensitivity settings > Auto ISO control (mode M) in the MOVIE SHOOTING MENU.
• Fixed an issue that resulted in third-party software showing an incorrect value for the Exif 35 mm format equivalent focal length field for photographs taken with a non-CPU lens connected via an FTZ mount adapter with the focal length specified using the Non-CPU lens data item in the SETUP MENU.
• Fixed an issue that resulted in photographs taken using radio-controlled Advanced Wireless Lighting being overexposed if a face was detected with Auto-area AF selected for AF-area mode.
• Fixed an issue that resulted in an incorrect aperture being selected in mode P (programmed auto) with a flash mounted on the camera under conditions in which f/32 would normally be selected.
• Fixed an issue which prevented flash units controlled via radio Advanced Wireless Lighting syncing with shutter speeds of 1/100 s or faster with:
- On selected for Flicker reduction shooting in the PHOTO SHOOTING MENU and
- Enable selected for Custom Setting d5 (Electronic front-curtain shutter) in the CUSTOM SETTING MENU.



:arrow: related topic: New firmware for Z6 & Z7 with AF improvements in May 2019
admin
site administrator
 
Posts: 182
Joined: Sun 10 May 2015 21:45

Return to Nikon Mirrorless

Who is online

Users browsing this forum: No registered users and 2 guests

cron