AF-S NIKKOR 300mm f/4E PF ED VR firmware update

About Nikon cameras(Film, coolpix, DSLR and Nikon mirrorless "Z"), lenses, accessories, links and firmware updates and sample pictures.

Moderator: Stany Buyle

Post Reply
User avatar
Stany Buyle
moderator
Posts: 2893
Joined: Sun 30 Nov 2008 15:05
Active Member?: Yes
Post pictures?: Yes
Contact:

AF-S NIKKOR 300mm f/4E PF ED VR firmware update

Post by Stany Buyle »

From the Nikon UK website:
To users of the AF-S NIKKOR 300mm f/4E PF ED VR lens

Thank you for choosing Nikon for your photographic needs.

Nikon will offer a service for updating AF-S NIKKOR 300mm f/4E PF ED VR firmware. Details of this firmware service are as follows.

Firmware update details
We have confirmed that when the AF-S NIKKOR 300mm f/4E PF ED VR lens is used with the D800, D800E or D810, images captured at shutter speeds of around 1/125 s with the VR function enabled (NORMAL or SPORT) sometimes exhibit noticeable blur.
To reduce the occurrence of this, we will offer a service for updating your AF-S NIKKOR 300mm f/4E PF ED VR firmware.
When cameras other than the D800, D800E or D810 are used, this firmware update is not needed.

Updating lens firmware
Users of the D800, D800E, or D810 who are concerned about this issue may take or send their lens to an Nikon Service Centre, where your lens firmware will be updated free of charge.

Identifying lenses with which the firmware has already been updated
Firmware for lenses with a serial number of 205101 or later have already been updated.

*Depending upon the way the camera is held when shooting, or the shooting conditions, images may be blurred even after this lens firmware is updated.

Requesting service
Please direct inquiries regarding this matter to your nearest Image Nikon Service Centre or create a Free Service Returns Request (not available in the Republic of Ireland).

For further assistance please contact Nikon Customer Support.
Post Reply