Nikon D4s firmware update 1.20

About Nikon cameras, lenses, accessories, links and firmware updates and sample pictures.

Moderator: Stany Buyle

Nikon D4s firmware update 1.20

Postby Stany Buyle » Tue 21 Apr 2015 11:22

From the Nikon UK website:
Nikon D4s firmware update 1.20

This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. Be sure you understand the terms of the agreement before beginning download.

• This service supplies software that can be used to update the D4S camera “C” firmware to version 1.20.
Before proceeding, select Firmware version in the camera setup menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.
• Read the information below before proceeding.
IMPORTANT: Firmware updates can not be performed if Enable is currently selected for Network > Network connection in the camera setup menu. Select Disable for Network connection before proceeding.

  • Select your operating system "Winows" or "Mac OS"

  • Changes from “C” Firmware Version 1.10
    • Commander mode can now be selected for Custom Setting e3 (Optional flash) when an optional SB-500 flash unit is attached. *
    • The Auto and Flash white-balance options can now be used with the LED light on the optional SB-500 flash unit.
    • Auto white balance is now more consistent.
    • There is no longer a limit on the number of shots that can be taken in a single burst at shutter speeds of 4 s or faster when a continuous-release mode is selected in exposure mode S or M. *
    • There is no longer a limit on how long the shutter can remain open when “Time” is selected for shutter speed. *
    • We have changed how focus points are displayed in the viewfinder if the camera is rotated between “wide” (landscape) and “tall” (portrait) orientations with Focus point and AF-area mode selected for Custom Setting a10 (Store by orientation) and different focus points chosen in each orientation. We have also changed how focus points are displayed in the viewfinder if a lens focus function button is pressed with AF-area mode selected for Custom Setting f19 (Lens focus function buttons).
    • Some help text has been changed.
    • The following issues have been resolved: - If the user focused using the AF-ON button before shooting in continuous-release mode, the frame rate would drop under the following conditions: AF-S selected for focus mode, Single-point AF selected for AF-area mode, Focus selected for Custom Setting a2 (AF-S priority selection), and AF-ON only selected for Custom Setting a4 (AF activation).
    - When an AF-S NIKKOR 800mm f/5.6E lens was attached, “Err” would be displayed in the top control panel and pictures could not be taken under some exposure conditions.
    - Images would sometimes fail to display correctly during image review if playback zoom was used while the memory-card access lamp was lit.
    - Images would not clear from the display if an optional WR-1 wireless remote controller was used with On selected for Image review in the playback menu.
    - The camera photo info display would not show the correct range for pictures taken with an optional flash unit in distance-priority manual flash mode (GN).
    - When pictures taken using a PC-E lens were viewed in Capture NX-D and other Nikon software, the Metadata would list the lens as type E rather than type D.
    - The photo information display for movies, movie stills, and photos taken with the Silent shutter-release option would sometimes list incorrect values for shutter speed, aperture, and ISO sensitivity.
    - If the camera was connected via HDMI to 4K a compatible TV, neither the camera nor the television would display menus correctly.
    - Volume sometimes could not be adjusted if indicators were hidden during movie playback.
    - If both XQD and CompactFlash cards were inserted in the camera when it was connected to a computer, the computer would not recognize the XQD card.
  • Viewing the Camera Firmware Version
    1.Turn the camera on.
    2.Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version.
    3.Check the camera firmware version.
    4.Turn the camera off.
  • Product Description
    :arrow: http://downloadcenter.nikonimglib.com/en/download/fw/138.html
  • Updating Camera Firmware
    :arrow: http://downloadcenter.nikonimglib.com/en/download/fw/138.html
  • End User License Agreement & download
    :arrow: http://downloadcenter.nikonimglib.com/en/download/fw/138.html

kindest regards,

Stany
I like better one good shot in a day than 10 bad ones in a second...
http://www.nikonuser.info
User avatar
Stany Buyle
moderator
 
Posts: 2301
Joined: Sun 30 Nov 2008 15:05

Return to Nikon

Who is online

Users browsing this forum: No registered users and 1 guest

cron