Page 1 of 1

Nikon service advisory for the AF-S 200-500 f5.6 ED VR

Posted: Wed 7 Oct 2015 21:53
by admin
From the Nikon UK website:
To users of the AF-S NIKKOR 200-500mm f/5.6E ED VR lens

Thank you for choosing Nikon for your photographic needs.

Nikon will implement a service for updating AF-S NIKKOR 200-500mm f/5.6E ED VR lens firmware. Details regarding implementation of this firmware service are as follows.

Firmware update details
We have confirmed that with autofocus shooting using the AF-S NIKKOR 200-500mm f/5.6E ED VR lens, autofocus may sometimes become disabled and focus operation switches to manual focus* when the zoom ring on the lens is rotated while the camera's shutter-release button is pressed halfway, or the camera's AF-ON button is held down.

*Autofocus operation can be restored by pressing the camera's shutter-release button halfway again, or pressing the camera's AF-ON button again.

To address the occurrence of this, we will implement a service for updating AF-S NIKKOR 200-500mm f/5.6E ED VR lens firmware.

Updating lens firmware
Those who would like to have their AF-S NIKKOR 200-500mm f/5.6E ED VR firmware updated may take or send their lens to a Nikon authorised service center, where the firmware will be updated free of charge.

Identifying lenses with which the firmware has already been updated
Firmware in lenses with a serial number of 2008365 or higher have already been updated.

Requesting service
Please direct inquiries regarding this matter to your nearest Image Nikon Service Centre or create a Free Service Returns Request.
Article No : 65374 Date published 05/10/2015
Date last updated 06/10/2015
:arrow: Hetzelfde bericht op de website van Nikon België.