Capture NX2 Update to version 2.2.3

Moderator: Stany Buyle

Post Reply
User avatar
Stany Buyle
moderator
Posts: 2893
Joined: Sun 30 Nov 2008 15:05
Active Member?: Yes
Post pictures?: Yes
Contact:

Capture NX2 Update to version 2.2.3

Post by Stany Buyle »

Info page @ Nikon UK: http://nikoneurope-en.custhelp.com/app/ ... a_id/45283

From this info page about this update:
"About this software
This software will update a previously installed full version of Capture NX v2.2.0-v2.2.2 to v2.2.3. When using the software as an updater, it may be necessary to enter the product key again to confirm ownership of a previous version of the software.
--------------------------------------------------------------------------------
Changes in this version
- Support for RAW images captured with the D3S has been added.
- When RAW (NEF/NRW) images with GPS information embedded were saved in JPEG format, GPS information was modified in some rare cases. This issue has been resolved.
- The accurate flash compensation value was not displayed for images captured using Advanced Wireless Lighting. This issue has been resolved.
- When a folder containing images with comments attached using some third-party software applications was selected, an error message was displayed and Capture NX 2 quit unexpectedly. This issue has been resolved.
--------------------------------------------------------------------------------
Install Notes
- It is not recommended to install both Nikon Capture and Capture NX on the same computer as this may cause unexpected issues to occur.
- You must have Administrator authority when installing this software.
- Internet connection is required to activate the trial version of this software.
- Exit all other applications that may be running, and turn off all virus-checking software before proceeding with this upgrade.
- Microsoft .NET 2.0 Framework is required and should automatically download and install if not already present on your computer. If download does not start automatically click here.
- The computer must be restarted when installation is complete.
- Click here for general instructions on how to download and open compressed files.
--------------------------------------------------------------------------------
System Requirements
OS
Microsoft Windows Vista Service Pack 2
Microsoft Windows XP Professional Service Pack 3
Microsoft Windows XP Home Edition Service Pack 3
Pre-installed 32-bit versions only

CPU
Pentium III 1 GHz or better
Pentium 4 (2 GHz or better or recommended)

RAM
256 MB minimum
1 GB recommended

Hard-disk space
200MB required for installation

Monitor resolution
800 x 600 pixels (1024 x 768 or higher recommended) with 16-bit colour (High Colour / thousands of colours) with 24-bit colour (True Colour / millions of colours) Recommended

--------------------------------------------------------------------------------
Supported cameras
SLR: D1 series, D2 series, D3 series, D700, D300S, D300, D200, D100, D90, D80, D70s, D70, D60, D50, D40x, D40, D3000, D5000
COOLPIX: 5000, 5400, 5700, 8400, 8700, 8800, P6000

File size - 37 MB (S-CNX2__-223WU-___EN.exe)
"
kindest regards,

Stany
I like better one good shot in a day than 10 bad ones in a second...
http://www.fotografie.cafe
Post Reply