firmware update 3.2 for Z6 & Z7

About Nikon cameras(Film, coolpix, DSLR and Nikon mirrorless "Z"), lenses, accessories, links and firmware updates and sample pictures.

Moderator: Stany Buyle

Post Reply
admin
site administrator
Posts: 600
Joined: Sun 10 May 2015 21:45
Active Member?: Yes
Post pictures?: Yes

firmware update 3.2 for Z6 & Z7

Post by admin »

From the nikon website:
Firmware ver. for Nikon mirrorless cameras "Z 7" and "Z 6". Published 3.20
Compatible with external recorders manufactured by Blackmagic Design

December 17,

:arrow: https://www.nikon-image.com/products/in ... m[/color]l


Z 6 Firmware :arrow: https://downloadcenter.nikonimglib.com/ ... w/380.html
Z7 Firmware :arrow: https://downloadcenter.nikonimglib.com/ ... w/381.html


Changes from “C” Firmware Version 3.12 to 3.20

• Support for RAW video output is available via a fee-for-service upgrade, * and firmware version 3.20 adds support under this service for Blackmagic Design external video recorders (currently the Video Assist 5″ 12G HDR and Video Assist 7″ 12G HDR). If you have already purchased the RAW video output upgrade for your camera, updating to firmware version 3.20 will add support for Blackmagic Design external video recorders automatically.
• Users of Apple’s Final Cut Pro X (version 10.4.9 or later) can now adjust ISO sensitivity—and display and adjust color temperature—for ProRes RAW footage output to ATOMOS NINJA V external recorders using the fee-for-service RAW video output upgrade. *
< Choosing a RAW Output Type >
Before filming RAW video, choose an option for HDMI > Advanced > RAW output options > RAW output type in the SETUP MENU based on the type of recorder connected: select Type A for NINJA V recorders and Type B for Video Assist recorders.
• Added support for NIKKOR Z 50mm f/1.2 S lenses.
• Fixed the following issues:
- Rotating the focus or (if Focus (M/A) is assigned to the control ring) control ring would sometimes fail to activate manual focus during burst photography when a NIKKOR Z lens was attached.
- The exposure indicator would not be displayed in mode M when a non-CPU lens was attached via an FTZ mount adapter.
- Certain aperture values would not be selected when control rings for the following lenses were rotated to stop aperture down in movie mode:
▹ NIKKOR Z 24-50mm f/4-6.3
▹ NIKKOR Z 24-200mm f/4-6.3 VR
▹ NIKKOR Z DX 16-50mm f/3.5-6.3 VR
▹ NIKKOR Z DX 50-250mm f/4.5-6.3 VR
• Unexpected aperture values would sometimes be displayed during bracketing in mode M if a bracketing option that made changes to aperture was selected with a NIKKOR Z lens attached.
• Power aperture controls would sometimes stop responding after the standby timer had been on for an extended period in movie mode.
* The RAW video output upgrade is available on a fee-for-service basis. For more information, contact a Nikon-authorized service representative.
Post Reply